Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
JUCKERS MT 500 is a single-component (1K) water-based lacquer designed primarily for light domestic and low-traffic commercial wood floors. It provides a clean, natural-looking sealed surface with good abrasion resistance for everyday use, without the hardness or chemical resistance of a 2K sports lacquer.
It is suitable as a full floor sealing system, applied over correctly prepared timber. Where required, it can be used in conjunction with JUCKERS SB Primer or WB Primer to improve adhesion, control tannin bleed, or stabilise difficult substrates.
MT 500 is not intended as a sports or heavy commercial lacquer. For those environments, a 2K system such as JUCKERS 700-series would normally be specified.
Available in Ultra Matt, Matt, and Silk Matt, allowing control over final sheen while maintaining a natural wood appearance.
Suitable for solid and engineered wood floors in domestic settings. Not suitable for oiled or waxed surfaces.
Volume: 5 litres
Finish options: Ultra Matt, Matt, Silk Matt
System: 1K water-based lacquer
Coverage: Approx. 8–10 m² per litre per coat
Typical system: 2–3 coats (primer used where specified)
Application: Roller or applicator
JUCKERS MT 500 is a single-component (1K) water-based lacquer designed primarily for light domestic and low-traffic commercial wood floors. It provides a clean, natural-looking sealed surface with good abrasion resistance for everyday use, without the hardness or chemical resistance of a 2K sports lacquer.
It is suitable as a full floor sealing system, applied over correctly prepared timber. Where required, it can be used in conjunction with JUCKERS SB Primer or WB Primer to improve adhesion, control tannin bleed, or stabilise difficult substrates.
MT 500 is not intended as a sports or heavy commercial lacquer. For those environments, a 2K system such as JUCKERS 700-series would normally be specified.
Available in Ultra Matt, Matt, and Silk Matt, allowing control over final sheen while maintaining a natural wood appearance.
Suitable for solid and engineered wood floors in domestic settings. Not suitable for oiled or waxed surfaces.
Volume: 5 litres
Finish options: Ultra Matt, Matt, Silk Matt
System: 1K water-based lacquer
Coverage: Approx. 8–10 m² per litre per coat
Typical system: 2–3 coats (primer used where specified)
Application: Roller or applicator