Wakol MS 330 Silane Primer 10kg – Rapid-Drying Moisture Barrier and Primer
Wakol MS 330 Silane Primer is a ready-to-use, single-component primer designed for both absorbent and non-absorbent subfloors.
This solvent- and water-free primer acts as a one-coat damp-proof membrane (DPM), effectively isolating residual moisture in cement screeds up to 95% relative humidity without underfloor heating.
It strengthens subfloors, binds old adhesive residues, and dries in approximately 60 minutes, allowing for swift progression to flooring installation.
This 10kg unit, covers 80-120 square metres as a primer or 40m2 as a DPM but varies based on surface regularity and porosity.
Wakol MS 330 Silane Primer is a ready-to-use, single-component primer designed for both absorbent and non-absorbent subfloors.
This solvent- and water-free primer acts as a one-coat damp-proof membrane (DPM), effectively isolating residual moisture in cement screeds up to 95% relative humidity without underfloor heating.
It strengthens subfloors, binds old adhesive residues, and dries in approximately 60 minutes, allowing for swift progression to flooring installation.
This 10kg unit, covers 80-120 square metres as a primer or 40m2 as a DPM but varies based on surface regularity and porosity.
Wakol MS 330 Silane Primer is a ready-to-use, single-component primer designed for both absorbent and non-absorbent subfloors.
This solvent- and water-free primer acts as a one-coat damp-proof membrane (DPM), effectively isolating residual moisture in cement screeds up to 95% relative humidity without underfloor heating.
It strengthens subfloors, binds old adhesive residues, and dries in approximately 60 minutes, allowing for swift progression to flooring installation.
This 10kg unit, covers 80-120 square metres as a primer or 40m2 as a DPM but varies based on surface regularity and porosity.