Rewmar Rapid Primer DPM 6kg – Fast-Drying Moisture Barrier and Primer
Rewmar Rapid Primer DPM is a single-component, fast-drying polyurethane primer designed for use over sand and cement screeds with up to 95% relative humidity (RH).
This versatile primer serves both as an adherence promoter and a moisture barrier. When applied in one coat, it acts as a primer for porous and non-porous substrates, including ceramic tiles and old adhesive residues.
For moisture barrier applications, two to three coats are recommended, applied in cross layers, to effectively waterproof absorbent surfaces.
Each 6kg pack covers approximately 40m² with a single coat and is suitable for use with underfloor heating systems. The primer dries within 45 to 60 minutes per coat at 20°C and 50% RH, allowing for efficient project progression.
Rewmar Rapid Primer DPM is a single-component, fast-drying polyurethane primer designed for use over sand and cement screeds with up to 95% relative humidity (RH).
This versatile primer serves both as an adherence promoter and a moisture barrier. When applied in one coat, it acts as a primer for porous and non-porous substrates, including ceramic tiles and old adhesive residues.
For moisture barrier applications, two to three coats are recommended, applied in cross layers, to effectively waterproof absorbent surfaces.
Each 6kg pack covers approximately 40m² with a single coat and is suitable for use with underfloor heating systems. The primer dries within 45 to 60 minutes per coat at 20°C and 50% RH, allowing for efficient project progression.
Rewmar Rapid Primer DPM is a single-component, fast-drying polyurethane primer designed for use over sand and cement screeds with up to 95% relative humidity (RH).
This versatile primer serves both as an adherence promoter and a moisture barrier. When applied in one coat, it acts as a primer for porous and non-porous substrates, including ceramic tiles and old adhesive residues.
For moisture barrier applications, two to three coats are recommended, applied in cross layers, to effectively waterproof absorbent surfaces.
Each 6kg pack covers approximately 40m² with a single coat and is suitable for use with underfloor heating systems. The primer dries within 45 to 60 minutes per coat at 20°C and 50% RH, allowing for efficient project progression.